Disa - Siemens HiPath 1100 Programming Manual

Step by step
When option 0 (Automatic ID) is selected, the ac-
tivation of this feature may impact the program-
ming of the Dialing mode. It is recommended
that you reconfigure the Dialing Mode (Pulse or
Tone) for the extensions).

DISA

This settings allows you to make an external call from an
external telephone (as if it was an extension) through
your system. In addition, the following features can be
activated or deactivated:
• Call forwarding
• Deactivating a feature
• Conference
• Night service
• Suffix dialing
• Door opener
• Electronic lock
• System and Individual speed dialing
• Relay
• Do not disturb
Only one external call can be made or one fea-
ture can be used at a time.
A feature that is activated during a call is deacti-
vated as soon as one of the parties hangs up.
TAPI only monitors physical ports. To operate
correctly, a DISA feature must use special ports,
and those cannot be monitored. If a physical port
is used when the DISA feature is activated, the
TAPI will be able to monitor it.
DISA
95