Override; Silent Monitoring - Siemens HiPath 1100 Programming Manual

Step by step
ehh
d
dhj
g
= Number only
w
Initial status for programming mode.

Override

This settings allows an extension to override another
extension when there is a conversation in progress.
When this is done, the call that is overridden receives a
warning tone.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g. 12/102).
w
e
Enter a permission type:
or
d
= no permission to override (default)
e
= with permission to override and sending warning
tone
w
p
Enter the next extension number.
or
w
r
Press this key.
Initial status for programming mode.

Silent monitoring

This feature allows an extension to override another ex-
tension without sending a warning signal to the parties
having a conversation (for certain countries only).
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g. 11/101).
Within the system, an override has the same lim-
itations as a conference or silent monitoring, that
is, a maximum of 2 simultaneous overrides are
allowed. Important: The Silent monitoring fea-
ture is ticketed as an Override.
Programming an extension
69