Step by step
djd
dii
q
dih
de.ge
w
Enter the programming code.
w
Initial status for programming mode.
Activating a software update
This feature allows you to update the system's software
automatically over an ISDN network on a scheduled
date.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
r
Activate/deactivate software update:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.
Day for SW Update
This setting specifies a day for starting the data transfer.
The default setting for the update to start is day 01.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
Enter the day for starting the transfer.
w
Initial status for programming mode.
General settings
109