Defining Timeout For External Calls; Day To Begin Timeout - Siemens HiPath 1100 Programming Manual

Step by step
fhd
fhe

Defining timeout for external calls

Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the extension number (e.g. 11/101).
w
p
Enter the length of time for the duration of external calls
for the specified extension (00000 to 64800 in 5-second
cycles), where 00000 = 0 seconds (default) ... 00036 =
180 seconds, etc.
w
p
Enter the next extension number.
or
w
r
Press this key.
Initial status for programming mode.

Day to begin timeout

This allows the user to define a day of the month on
which the timeout for external calls on all extensions
will begin.
The default setting for this feature is deactivated.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the end day for the time limit for external calls (01
to 31)
or
q
Press the key to deactivate the feature.
w
Initial status for programming mode.
Programming an extension
89