Remote Administration Password Through An Msn; Delete Disconnected Consoles - Siemens HiPath 1100 Programming Manual

Step by step
ffh
d . f
ffd
This setting specifies how the MSN is shown on a sys-
tem telephone display. In the default configuration no
Mode is configured.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
Select the information to be shown on the display:
d
= None (default)
e
= MSN name
f
= MSN number
w
Initial status for programming mode.
This feature does not work when option 1 is se-
lected in the programming of code 039Caller ID
by name/number.
Remote administration password
through an MSN
This setting allows you to specify a password so that all
incoming calls from a remote HiPath 1100 Manager that
provides the correct password can be authorized to ex-
ecute remote administration. In the default configura-
tion, no password is set.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter an access code consisting of a maximum of 5 dig-
its.
w
Initial status for programming mode.
In order to enable this feature the Without MSN
verification function (Code 070) must also be ac-
tivated.

Delete disconnected consoles

General settings
123