Type Of Answering Signal - Siemens HiPath 1100 Programming Manual

External line settings
Step by step
eil
d . f
48

Type of answering signal

When a carrier provides this facility, the ticketing pro-
cess occurs in real time. That is, when the called party
answers/hangs up, the public exchange sends a signal
to the system to initiate/end call detail report.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter a number for an analog trunk (e.g., 801).
w
Enter the appropriate number for signaling type:
d
= None (default)
e
= Polarity reversal
f
= DTMF tone
w
p
Enter the next number for the analog trunk.
or
w
r
Press this key.
Initial status for programming mode.
When DTMF is selected, you must program a
tone (A, B, C or D) using Manager. If a tone is not
programmed using the Manager, the switch de-
faults to tone A.
When using the GROUND option for Canada,
this feature must be deactivated for external
lines.
If this feature is activated, outgoing external calls
cannot involve consultation or transfer before the
destination user picks up.