Answering Menu - Siemens HiPath 1100 Programming Manual

Fax/DID
Step by step
Fax/DID Mode
In this connection state the Interface detects fax sig-
nals, and extensions or digits entered. When an exter-
nal call is answered a greeting message is played to
guide the caller. The following is an example of a record-
ed message: "You have reached Siemens. To send a fax,
start transmission now. For the sales department, dial
22. For technical support, dial 23." If no valid fax signal,
digit or extension is detected within 10 seconds of the
greeting announcement, a second greeting will be
played and the call will be transferred to an attendant.
Greeting mode
When an external call is answered, a greeting message
is played and the call is transferred to an attendant. The
following is an example of a recorded message: "You
have reached Siemens. Your call is being transferred."
Auto-Fax mode
When this mode is activated, the system can detect a
fax signal during the first ten seconds of a conversation
then transfer the call to a specified extension, such as a
Fax/DID. When no signal is detected the conversation
proceeds as usual.

Answering menu

The HiPath 1100 lets you create a customized call an-
swering menu transferring the call to an extension or a
group, depending on the number entered.
A call is transferred to a preconfigured destination after
3 seconds. If a digit is entered before this period of
time, it will be analyzed and the call will be forwarded to
a new destination. The destination can be an extension
or a group.
When the Call Answering Menu is not configured, the
system can only detect extension and group numbers.
Required: Programming mode must be activated (*95
31994).
w
ddm
Enter the programming code.
d m q
Select a digit for call forwarding.
... or
140