Voice Mail Group; Mailbox Assignment For Auto-Answering Mode; Audio Quality - Siemens HiPath 1100 Programming Manual

EVM module
Step by step
fei
fej
khme khmf
or
ffl
176

Voice mail group

This setting specifies the UCD group to be used by the
system.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the UCD subscriber group number (790 to 799).
or
w
q
Press this key to delete a specified group.
w
Initial status for programming mode.
Mailbox assignment for auto-answer-
ing mode
This setting assigns mailboxes to auto-answering slots.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
e f
Enter the number of the mailbox you would like to se-
or
lect.
Enter a greeting port for auto-answering.
w
r
Press this key.
Initial status for programming mode.

Audio quality

This setting specifies the audio quality for playing back
greetings and messages.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
If only one extension is selected as the first at-
tendant, only one voice mail group may be se-
lected as a second MSN attendant, (see HiPath
1100 Manager).