Programming an extension
Step by step
eie
w
p
eie
ehj
de
...
80
Assigned group
With this feature you can associate several extensions
to one Executive telephone. There are 8 groups avail-
able with 16 extensions for each group. An associated
group is assigned to each master telephone. To ensure
proper operation all extensions must have system tele-
phones installed. An extension can be assigned to mul-
tiple groups simultaneously.
By default no associated group is configured.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter an extension for the master telephone (e.g., 11/
101).
w
. p
Specify up to 15 extensions as secretary telephones
(e.g: 12/102).
w
r
Press this key.
Initial status for programming mode.
Delete associated group
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter an extension for the master telephone (e.g., 11/
101).
w
q
The master telephone extension is deactivated.
w
r
Press this key.
Initial status for programming mode.
CD interface assignment
Assigning CD ports to extension slots allows system
telephones to be connected to the PABX.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
fh
Enter a number from 01 to 24 for the CD port.
de
dh
to
= for the HiPath 1120