Important settings
Step by step
dmf
q
38
w
Enter the programming code.
w
r
Activate/Disable Tone:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.
Example for LCR settings on a local
network
This example shows the sequence for creating and dis-
tributing destinations:
"National" option
1. Create a name for the new tab, for example, Nation-
al.
2. Add the carrier(s) to the existing list for long national
calls.
3. For destination, enter all area codes or partial area
codes to cover all numbers within the country.
4. Finally, enter the time intervals in the time interval
table. With time intervals left empty, the line of the
default carrier will be occupied immediately.
5. Select the line group on which calls will be made
and the overflow line group to be used when the
line group is busy.
This feature only works on ISDN lines.
At present, you can specify up to 100 destina-
tions and 15 carriers
Settings must be configured using the HiPath
1100 Manager.