Music Source For The Moh Group; Music Source Extension - Siemens HiPath 1100 Programming Manual

Step by step
dlk
dll
dlm
e f
Select group 1 or 2.
or
w
p
Enter the extension numbers (e.g., 11/101).
w
r
Press this key.
Initial status for programming mode.
Deleting Extensions in a group
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
e f
Select group 1 or 2.
or
w
q
To delete all extensions in the group.
w
r
Press this key.
Initial status for programming mode.

Music source for the MOH group

When an extension has a call on hold, the caller will hear
the music programmed for that extension's group.
w
Enter the programming code.
e f
Select group 1 or 2.
or
q . h
Enter the code for a music source:
d
= No music
e
= Internal - MIDI (default)
f
= Internal - WAVE
g
= External
h
= External – extension
w
r
Press this key.
Initial status for programming mode.

Music source extension

This is an extension to which a music source is connect-
ed.
No extensions are configured as a default.
w
Enter the programming code.
e f
Select group 1 or 2.
or
w
p
Enter the extension number (e.g. 11/101).
General settings
99