Notify; Automatic Keypad - Siemens HiPath 1100 Programming Manual

Digital trunk settings
Step by step
q
dkj
de
dg
q
152
dd . de
port 00 is only for the external line - PP or PMP)
dd . dh
dd . dh
module, place position 11 and port from 00 ... 04).
w
r
Activate/Deactivate ACK setup:
or
q
= Activated
r
= Deactivated (default)
w
Initial status for programming mode.

Notify

Check with your local carrier to find out which operating
mode should be configured for your system.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
df
, , Type in the S
ee
or
p
Enter the slot for the S
dd . de
port 00 is only for the external line - PP or PMP)
dd . dh
dd . dh
module, place position 11 and port from 00 ... 04).
w
r
Activate/deactivate notify:
or
q
= Activated (default)
r
= Deactivated
w
Initial status for programming mode.

Automatic Keypad

This feature allows you to activate the appropriate ISDN
function at the terminal, without the need for external
access.
[1] Module slots are: HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
= For the HiPath 1120 (The Position of
= For the HiPath 1150;
= For the HiPath 1190 (For the second
module slot on the system
0
module slot:
0
= For the HiPath 1120 (The Position of
= For the HiPath 1150
= For the HiPath 1190 (For the second
1
.