Hide Group Prefix - Siemens HiPath 1100 Programming Manual

Step by step
ell
q
e
= DTMF prior to ringing
f
= DTMF during ringing
g
= FSK before ringing (Default for Korea)
h
= FSK during ringing
i
= FSK prior to ringing or during a conversation
j
= FSK during ringing or a conversation
w
p
Enter the next analog extension number.
or
w
r
Press this key.
Initial status for programming mode.

Hide group prefix

This settings allows an extension to receive an external
call over an external line belonging to a group of external
lines, and to hide the group number so it does not show
on the display. When a special access call is received
and transferred to an extension with this feature is acti-
vated, the external line number does not show on the
display.
Example: An analog extension receives an external call
over an external line that belongs to group 890 - number
24987049. When this feature is activated, the display
show only 24987049. When this feature is deactivated,
the display shows 89024987049, that is, the number for
the group of external lines followed by the external
number.
Required: Programming mode must be activated (*95
31994).
w
Enter the programming code.
w
p
Enter the analog extension number (e.g., 12/102).
w
r
To activate/deactivate external CFW:
or
q
= Activated
r
= Deactivated (default)
(default for France)
If the country set (code 165
the CLIP FSK feature will be available for the Hi-
Path 1120 only.
Programming an extension
page 20) is France,
71