Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Date:
31.01.2009
Time:
00:00
Back
¤
Enter the hours and minutes in 4-digit
format via the keypad,
e.g., QM
5 for 07:15 am.
Change the input position with
the control key if necessary.
Calls
Time
Date/Time
Save
¤
Press the key below
display to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢
page 24.)
The Date/Time submenu is shown on the
display.
¤
The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g.,
4
Q2QQ
O for 14/10/2009.
Press the right or left control key
to change the input position and
correct an entry.
¤
Press down on the control key to switch to the
Time input field.
First steps
§Time§
on the screen
Date/Time
Date:
14.10.2009
Time:
00:00
Back
Save
13