Deleting Digits From A Caller List; Date/Time - Manual Setting - Siemens HiPath 1100 Series Programming Manual

Step by Step
Wait 5 seconds
D D
M
1 2
H

Deleting Digits from a Caller List

Digits configured with this feature cannot be dialed
when using a Caller List. For example,
The following number is stored in the Caller List:
0893415000 and the digits configured for deletion are
089 (area code).
The system dials only the number 3415000. The code
089 will not be dialed.
In the default configuration no digits are excluded.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
7 1
Enter the first digits (up to 6) that are not supposed to
be dialed when using a Caller List.
Wait for a confirmation tone.
Initial state for Programming Mode.

Date/Time - Manual Setting

The date and time can be shown on your system
telephone display. It is important to set the correct time/
date for recording call details.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 4
Enter the date and time:
Y Y
M
1 2 1 2
H
MI MI
1 2 1 2
D D
1 2
M M
1 2
Y Y
1 2
H H
1 2
MI MI
1
For example, 0508990830 for 05/08/99, 8:30 a.m.
Initial state for Programming Mode.
= Day, from 1 to 31
= Month, from 1 to 12
= Year, from 00 to 99
= Hour, from 00 to 23
= Minutes, from 00 to 59
2
General Programming
81