Table of Contents
Advertisement
2
Before you start
2.1
Basic information
2.1.1
Proceeding
Before you start any upgrade or maintenance task, proceed as follows:
▶ Carefully read the safety instructions, see
page
25.
▶ Make sure that all necessary manuals are available, see
overview" on page
▶ Make yourself familiar with the procedure categories, see
procedures" on page
▶ Ensure that all required tools are available, see
page
20.
2.1.2
Advanced Thermal Design (ATD)
The ATD option allows you to operate the system with a wider temperature
range either of 5 °C to 40 °C, depending on your system and configuration.
This option can only be ordered from the manufacturer and is
indicated by the respective logo on the identification rating plate.
CAUTION
▶
In a system that is configured with ATD, only certain components
which support the respectively increased higher operating
temperature range may be installed and used. For applicable
restrictions, see the official configurator tool.
CX400 M6
21. Print the PDF files if required.
16.
Upgrade and Maintenance Manual
"Important information" on
"Documentation
"Classification of
"Tools you need at hand" on
15
Advertisement
Table of Contents
