Removing The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
Installing HDD modules into the 4x 3.5-inch HDD extension box
▶ Install HDD modules or HDD dummy modules into the additional HDD bays,
see "Installing a 3.5-inch HDD module" on page 187
inch dummy module" on page
For detailed information on HDD mounting order, see
configurations" on page
Concluding steps
▶ If applicable, convert your standard power supply to a redundant power
supply, see "Converting a standard power supply to a redundant power
supply" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Resuming BitLocker functionality" on page 121
7.6.5

Removing the 4x 3.5-inch HDD extension box

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
260
190.
181.
164.
66.
Upgrade and Maintenance Manual
79.
81.
Hardware: 10 minutes
Software: 10 minutes
99.
47.
48.
and "Installing a 3.5-
"3.5-inch HDD
126. Select the
TX1330 M4