▶
"Switching on the server" on page
7.6.5
Installing the 4x 3.5-inch HDD extension box
Upgrade and Repair Unit
(URU)
Slotted screw driver (for bending in or out accessible drive
Tools:
mounting brackets)
After installing or removing an extension box, never forget to change the
system information using the Chassis ID Prom Tool.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
▶ Remove the fan bridge, see
Removing accessible drive dummy covers
▶ Remove accessible drive filler covers from the required bays, see
"Removing accessible drive filler covers" on page
▶ Remove accessible drive covers, see
on page
101.
Installing the ultraslim ODD into the HDD extension box
▶ If applicable, install the ultraslim ODD into the new 4x 3.5-inch HDD
extension box, see
extension box" on page
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
83.
49.
"Handling the fan bridge" on page
"Installing the ultraslim ODD in the 4x 3.5-inch HDD
444.
Upgrade and Maintenance Manual
Hardware: 10 minutes
Software: 10 minutes
107.
50.
51.
67.
100.
"Removing accessible drive covers"
92.
277