Toyota 1 MZ–FE Manual page 99

1MZ–FE ENGINE – ENGINE MECHANICAL
(e) Remove any old packing (FIPG) material.
(f) Apply seal packing to the No. 1 bearing cap as shown.
Seal packing:
Part No. 08826–00080 or equivalent
(g) Install the 5 bearing caps in their proper locations.
(h) Apply a light coat of engine oil on the threads and
under the heads of the bearing cap bolts.
(i) Install and uniformly tighten the 10 bearing cap bolts,
in several passes, in the sequence shown.
Torque: 16 N–m (160 kgf–cm, 12 ft–lbf)
B. Install intake camshaft of RH cylinder head
(a) Apply new engine oil to the thrust portion and journal
of the camshaft.
(b) Align the timing marks (2 dot marks) of the camshaft
drive and driven gears.
(c) Place the intake camshaft on the cylinder head.
(d) Install the 5 bearing caps in their proper locations.
EG2–99