EG2–302
1MZ–FE ENGINE
–
SFI SYSTEM
(f) Connect the following hoses and connectors:
(1) Radiator inlet hose
(2) Engine coolant reservoir hose
(3) ECT sensor connector
(4) ECT switch connector
(5) Ground strap connector
9. REINSTALL INTAKE MANIFOLD ASSEMBLY
(a) Install the intake manifold assembly with the 9 bolts, 2
plate washers and 2 nuts.
Torque: 15 N–m (150 kgf–cm, 11 ft–lbf)
(b) Connect the heater hose to the intake manifold.
10. RECONNECT INJECTOR CONNECTORS
11. RETIGHTENING WATER OUTLET MOUNTING BOLTS
AND NUTS
Torque: 15 N–m (150 kgf–cm, 11 ft–lbf)
12. REINSTALL AIR INTAKE CHAMBER ASSEMBLY
(See steps 5 to 14 on pages
EG2–254
to 257)