Toyota 1 MZ–FE Manual page 25

1MZ–FE ENGINE – ENGINE MECHANICAL
23. RECONNECT ENGINE WIRE TO ENGINE RH SIDE
(a) Connect the engine wire with the 5 nuts.
(b) Connect the following connectors:
(1) 3 injector connectors
(2) 3 ignition coil connectors
24. RECONNECT ENGINE WIRE TO ENGINE REAR SIDE
Connect the engine wire with the 2 nuts.
25. RECONNECT ENGINE WIRE TO ENGINE LH SIDE
(a) Connect the engine wire with the 2 nuts.
(b) Connect the following connectors:
(1) 3 injector connectors
(2) 3 ignition coil connectors
26. RECONNECT ENGINE WIRE TO NO.3 TIMING BELT
COVER
(a) Connect the 3 clamps.
(b) Connect the engine wire with the bolt.
EG2–25