Toyota 1 MZ–FE Manual page 118

EG2–118
1MZ–FE ENGINE – ENGINE MECHANICAL
(c) Connect the following vacuum hoses:
(1) Vacuum hose to fuel pressure control VSV
(2) Vacuum hose to fuel pressure regulator
(3) Vacuum hose to cylinder head rear plate
(4) Vacuum hose to intake air control valve VSV
(5) Vacuum hose to EGR vacuum modulator
(6) Vacuum hose to EGR valve
42. INSTALL V–BANK COVER
Using a 5 mm hexagon wrench, install the V–bank
cover with the 2 nuts.
43. CONNECT PRESSURE HOSE TO HYDRAULIC
MOTOR
Connect the pressure hose to the water inlet.
44. CONNECT FUEL HOSES
(a) Connect the fuel return hose to the fuel pipe.
(b) Connect the fuel inlet hose to the fuel filter.
Torque: 30 N–m (300 kgf–cm, 22 ft–lbf)
45. CONNECT HEATER HOSES
Connect the 2 hoses.