Toyota 1 MZ–FE Manual page 553

INSPECTION PROCEDURE
Check voltage between terminal 1 of igniter connector (12) and
body ground.
Check voltage between terminals 2 – 7 of igniter connector
and body ground.
1MZ–FE ENGINE – CIRCUIT INSPECTION
(1) Disconnect igniter connector (12)
(2) Turn ignition switch ON.
Connector 12 color is dark gray
Measure voltage between terminal 1 of igni-
ter connector 12 and body ground.
Voltage: 9 –14 V
Check and repair igniter power source
circuit.
Measure voltage between terminals 2 – 7 of ig–
niter connector (12) and body ground.
Voltage: 9 – 14 V
Go to step
EG2–553