Toyota 1 MZ–FE Manual page 114

EG2–114
1MZ–FE ENGINE – ENGINE MECHANICAL
35. CONNECT ENGINE WIRE TO ENGINE LH SIDE
(a) Connect the following connectors:
(1) 3 injector connectors
(2) 3 ignition coil connectors
(b) Connect the engine wire with the 2 nuts.
36. INSTALL EGR VALVE AND VACUUM MODULATOR
TO AIR INTAKE CHAMBER
Install a new gasket, the EGR valve and vacuum mod–
ulator with the 3 nuts.
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)
37. INSTALL THROTTLE BODY TO AIR INTAKE
CHAMBER
(a) Place a new gasket on the air intake chamber.
(b) Install the throttle body with the 2 bolts and 2 nuts.
Torque: 19.5 N–m (200 kgf–cm. 14 ft–lbf)
(c) Connect the following vacuum hoses:
(1) Vacuum hose to P port of EGR vacuum modula–
tor
(2) Vacuum hose to R port of EGR vacuum modula–
tor
38. INSTALL A/C IDLE–UP VSV TO AIR INTAKE
CHAMBER
(a) Install the A/C idle–up VSV with the 2 bolts.
(b) Connect the air hose.