Toyota 1 MZ–FE Manual page 329

1MZ–FE ENGINE – COOLING SYSTEM
3. REMOVE AIR CLEANER CAP, VOLUME AIR FLOW
METER AND AIR CLEANER HOSE
(a) Disconnect the volume air flow meter connector and
wire clamp.
(b) Disconnect the accelerator cable clamp.
(c) Disconnect the PCV hose.
(d) Loosen the air cleaner hose clamp bolt.
(e) Disconnect the 4 air cleaner cap clips.
(f) Remove the air cleaner cap and volume air flow meter
together with the air cleaner hose.
4. DISCONNECT HEATER HOSE
5. DISCONNECT PRESSURE HOSE OF HYDRAULIC
MOTOR
Remove the bolt and disconnect the pressure hose
from the water inlet.
6. DISCONNECT ENGINE WIRE
Remove the 2 nuts and disconnect the engine wire
from the water inlet and cylinder head.
7. DISCONNECT ENGINE COOLANT TEMPERATURE
(ECT) SENSOR CONNECTOR
8. DISCONNECT WATER INLET PIPE
(a) Remove the bolt holding the water inlet pipe to the
cylinder head.
(b) Disconnect the water inlet pipe and remove the 0–
ring.
EG2–329