Toyota 1 MZ–FE Manual page 116

EG2–116
1MZ–FE ENGINE – FE ENGINE – ENGINE MECHANICAL
(3) Vacuum hose to charcoal canister
(d) Connect the following connectors:
(1) Throttle position sensor connector
(2) IAC valve connector
(3) EGR gas temperature sensor connector
(4) A/C idle–up connector
(e) Install 2 new gaskets and EGR pipe with the 4 nuts.
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)
(f) Install the No.1 engine hanger with the 2 bolts.
Torque: 39 N–m (400 kgf–cm, 19 ft–lbf)
(g) Install the air intake chamber stay with the 2 bolts.
Torque: 19.5 N–m (200 kgf–cm, 14 ft–lbf)
(h) Connect the 2 PS air hoses.
(i) Connect the PS pressure tube with the 2 nuts.