Toyota 1 MZ–FE Manual page 15

1MZ–FE ENGINE – ENGINE MECHANICAL
(d) Remove the bolt and disconnect the hydraulic motor
pressure hose from the air intake chamber.
(e) Remove the bolt, and disconnect the ground strap.
(f) Disconnect the RH oxygen sensor connector clamp
from the PS pressure tube.
(g) Remove the 2 nuts, and disconnect the PS pressure
tube.
(h) Disconnect the 2 PS air hoses.
(i) Remove the 2 bolts and No.1 engine hanger.
(j) Remove the 2 bolts and air intake chamber stay.
(k) Remove the 4 nuts, EGR pipe and 2 gaskets.
EG2–15