Toyota 1 MZ–FE Manual page 105

1MZ–FE ENGINE – ENGINE MECHANICAL
9. INSTALL PS BRACKET
Install the PS bracket with the 3 bolts.
Torque: 43 N–m (440 kgf–cm, 32 ft–lbf)
10. INSTALL OIL DIPSTICK AND GUIDE
(a) Install a new O–ring to the dipstick guide.
(b) Apply soapy water to the 0– ring.
(c) Push in the dipstick guide end into the guide hole of
the No. 1 oil pan.
(d) Install the dipstick guide with the bolt.
Torque: 8 N–m (80 kgf–cm, 69 in.–lbf)
(e) Install the dipstick.
11. INSTALL LH EXHAUST MANIFOLD
(a) Install a new gasket and the exhaust manifold with the
6 nuts.
Torque: 49 N–m (500 kgf–cm, 36 ft–lbf)
(b) Install the exhaust main manifold stay with the bolt
and nut.
Torque: 19.5 N–m (200 kgf–cm, 14 ft–lbf)
(c) Install the main heated oxygen sensor (Bank 2 Sensor
1).
Torque: 44 N–m (450 kgf–cm, 33 ft–lbf)
EG2–105