EG2–74
1MZ–FE ENGINE
–
ENGINE MECHANICAL
(c) Remove the 6 nuts, exhaust manifold and gasket.
43. REMOVE OIL DIPSTICK AND GUIDE
(a) Remove the bolt holding the dipstick guide to the LH
cylinder head.
(b) Pull out the dipstick guide together with the dipstick
from the No.1 oil pan.
(c) Remove 0–ring from the dipstick guide.
44. REMOVE PS BRACKET
Remove the 3 bolts and PS bracket.
45. REMOVE RH EXHAUST MANIFOLD
(a) Remove the main heated oxygen sensor (Bank 1
Sensor 1).
(b) Remove the 4 nuts, EGR pipe and 2 gaskets.