Toyota 1 MZ–FE Manual page 188

EG2–188
1MZ–FE ENGINE – ENGINE MECHANICAL
28. INSTALL AIR CLEANER CAP, VOLUME AIR
FLOW METER AND AIR CLEANER HOSE
(a) Connect the air cleaner hose, and install the air clean–
er cap and volume air flow meter with the 4 clips.
(b) Tighten the air cleaner hose clamp bolt.
(c) Connect the PCV hose.
(d) Connect the accelerator cable clamp.
(e) Connect the volume air flow meter connector and
wire clamp.
29. CONNECT THROTTLE CABLE
30. CONNECT ACCELERATOR CABLE
31. FILL ENGINE WITH OIL
Capacity:
Drain and refill
w/ Oil filter change
4.7 liters (5.0 US qts, 4.1 Imp. qts)
w/o Oil filter change
4.5 liters (4.8 US qts, 4.0 Imp. qts)
Dry fill
5.5 liters (5.8 US qts, 4.8 Imp. qts)
32. FILL WITH ENGINE COOLANT
Capacity:
8.7 liters (9.2 US qts, 7.7 Imp. qts)
33. INSTALL BATTERY TRAY AND BATTERY
34. START ENGINE AND CHECK FOR LEAKS
35. PERFORM ROAD TEST
Check for abnormal noise, shock, slippage, correct
shift points and smooth operation.
36. RECHECK ENGINE COOLANT AND ENGINE OIL
LEVELS