Toyota 1 MZ–FE Manual page 106

EG2–106
1MZ–FE ENGINE – ENGINE MECHANICAL
12. INSTALL No.2 ENGINE HANGER
Install the engine hanger with the 2 bolts.
Torque: 19.5 N–m (200 kgf–cm, 14 ft–lbf)
13. INSTALL WATER OUTLET
(a) Connect the water outlet to the bypass hose.
(b) Install 2 new gaskets and the water outlet with the 2
bolts, 2 nuts and 2 plate washers.
Torque: 15 N–m (150 kgf–cm, 11 ft–lbf)
NOTICE: Do not scratch the seal surface of the water
outlet with the stud bolt.
14. INSTALL INJECTORS AND DELIVERY PIPES
(a) Install 2 new grommets to each injector.
(b) Apply a light coat of gasoline to 2 new 0–rings and
install them to each injector.
(c) While turning the injector clockwise and counter–
clockwise, push it to the delivery pipes. Install the 6
injectors.
(d) Position the injector connector outward.
(e) Place the 4 spacers in position on the intake manifold.