Toyota 1 MZ–FE Manual page 183

1MZ–FE ENGINE – ENGINE MECHANICAL
10. INSTALL ENGINE MOUNTING ABSORBER
Install the engine mounting absorber with the 4 bolts.
Torque: 48 N–m (490 kgf–cm, 35 ft–lbf)
11. CONNECT RR ENGINE MOUNTING INSULATOR
(a) Connect the mounting insulator with the 4 nuts.
Torque: 65.7 N–m (670 kgf–cm, 48 ft–lbf)
(b) Install the 2 hole plugs.
12. CONNECT LH ENGINE MOUNTING INSULATOR
Connect the mounting insulator with the 4 bolts.
Torque: 63.7 N–m (650 kgf–cm, 47 ft–lbf)
13. REMOVE ENGINE SLING DEVICE
14. INSTALL PS PUMP
(a) Install the PS pump with the 2 bolts.
Torque: 43 N–m (440 kgf–cm, 31 ft–lbf)
(b) Install the drive belt.
15. CONNECT HYDRAULIC COOLING FAN PRESSURE
HOSE
Using SST, connect the pressure hose.
SST 09631– 22020
Torque: 44 N–m (450 kgf–cm, 33 ft–lbf)
EG2–183