Toyota 1 MZ–FE Manual page 179

1MZ–FE ENGINE – ENGINE MECHANICAL
3. INSTALL TRANSAXLE TO ENGINE
A. Install transaxle
(a) Attach the transaxle to the engine.
(b) Install the6 bolts.
Torque: 64 N–m (650 kgf–cm, 47 ft–lbf)
(c) Install the 2 bolts holding the No.2 oil pan to the
transaxle.
Torque: 46 N–m (470 kgf–cm, 34 ft–lbf)
(e) Install the No.2 manifold stay with the bolt and nut.
Torque: 20 N–m (200 kgf–cm. 14 ft–lbf)
(f) Install the manifold stay, exhaust manifold plate with
the bolt and 2 nuts.
Torque: 20 N–m (200 kgf–cm, 14 ft–lbf)
HINT: Install the manifold so that the tip of the stay
touches the head of the differential retainer installa–
tion bolt as shown in the illustration.
B. Install torque converter clutch mounting bolts
(a) Clean the threads of the bolt with the gasoline.
(b) Apply adhesive to 2 or 3 threads of the mount bolt.
Adhesive:
Part No. 08833–00070, THREE BOND 1324 or
equivalent
EG2–179