Toyota 1 MZ–FE Manual page 56

EG2–56
1MZ–FE ENGINE – FE ENGINE – ENGINE MECHANICAL
21. INSTALL AND ADJUST PS DRIVE BELT
Install the drive belt with the pivot and adjusting bolts.
Drive belt tension:
New belt
150 185 I bf
Used belt
115 20 lbf
22. INSTALL GENERATOR DRIVE BELT
Adjust the drive belt. (See CH section)
Drive belt tension:
New belt
175 5 lbf
Used belt
115 20 lbf
23. INSTALL COOLANT RESERVOIR TANK
24. CONNECT NEGATIVE (–) TERMINAL CABLE TO
BATTERY
25. START ENGINE, AND CHECK FOR ABNORMAL
NOISE AND SMOOTH OPERATION
26. INSTALL RH FENDER APRON SEAL
27. INSTALL RH FRONT WHEEL