Toyota 1 MZ–FE Manual page 390

EG2–390
1MZ–FE ENGINE – LUBRICATION SYSTEM
(e) Connect the front exhaust pipe clamp with the 2 bolts.
Torque: 29 N–m (300 kgf–cm, 22 ft–lbf)
10. INSTALL A/C COMPRESSOR HOUSING BRACKET
Install the housing bracket with the 3 bolts.
Torque: 26 N–m (250 kgf–cm, 18 ft–lbf)
11. INSTALL A/C COMPRESSOR
(a) Install the A/C compressor and drive belt adjusting
bar bracket with the 5 bolts.
Torque: 25 N–m (250 kgf–cm, 18 ft–lbf)
12. INSTALL OIL HOLE COVER PLATE
Install a new gasket and the hole cover plate (J mark
facing outward) with the 4 bolts.
Torque: 8 N–m (80 kgf–cm, 69 in.–Ibf)
13. INSTALL CRANKSHAFT POSITION SENSOR
Install the position sensor with the bolt.
Torque: 8 N–m (80 kgf–cm, 89 in.–lbf)