Toyota 1 MZ–FE Manual page 128

EG2–128
1MZ–FE ENGINE – ENGINE MECHANICAL
17. REMOVE FRONT EXHAUST PIPE
(a) Remove the 2 bolts and exhaust pipe clamp.
(b) Remove the 2 bolts, and disconnect the bracket.
(c) Remove the 2 bolts and 2 nuts holding the front
exhaust pipe to the three–way catalytic converter.
(d) Remove the 4 nuts holding the front exhaust pipe to
the exhaust manifolds.
(e) Remove the front exhaust pipe and 3 gaskets.
18. REMOVE DRIVE SHAFTS
(See SA section)
19. DISCONNECT PS PRESSURE TUBE
(a) Disconnect the 2 PS air hoses.
(b) Remove the 2 nuts and disconnect the PS pressure
tube.
20. DISCONNECT HYDRAULIC COOLING FAN
PRESSURE HOSE
Using SST, disconnect the pressure hose.
SST 09631– 22020
21. REMOVE PS PUMP WITHOUT DISCONNECTING
HOSES
(a) Remove the PS drive belt.
(b) Remove the 2 bolts, and disconnect the PS pump from
the engine.
HINT: Move the PS pump aside and suspend it.