Toyota 1 MZ–FE Manual page 256

EG2–256
1MZ–FE ENGINE – FE ENGINE – SFI SYSTEM
(k) Install the bolt holding the air intake chamber stay to
the air intake chamber.
Torque: 19.5 N–m (200 kgf–cm. 14 ft–lbf)
(1) Connect the 2 PS air hoses.
6. CONNECT HYDRAULIC MOTOR PRESSURE PIPE
Connect the pressure pipe to the air intake chamber
and water inlet with the 2 bolts.
Torque: 8 N–m (80 kgf–cm, 69 in.–lbf)
7. INSTALL NO.2 EGR PIPE
Install 2 new gaskets and the EGR pipe with the 4
nuts.
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)
8. INSTALL EMISSION CONTROL VALVE SET
(a) Install the emission control valve set with 2 bolts.
Torque: 8 N–m (80 kgf–cm, 69 in.–lbf)
(b) Connect the following connectors:
(1) VSV connector for ACIS
(2) VSV connector for EGR
(3) VSV connector for fuel pressure control