Toyota 1 MZ–FE Manual page 104

EG2–104
1MZ–FE ENGINE – ENGINE MECHANICAL
(b) Install the gasket to the cylinder head cover.
(c) Install the cylinder head cover with the 8 bolts. Uni–
formly tighten the bolts in several passes. Install the 2
cylinder head covers.
Torque: 8 N–m (80 kgf–cm, 69 in.–lbf)
8. INSTALL RH EXHAUST MANIFOLD
(a) Install a new gasket and the exhaust manifold with the
6 nuts.
Torque: 49 N–m (500 kgf–cm, 36 ft–lbf)
(b) Install the exhaust manifold stay and plate with the
bolt and 2 nuts.
Torque: 19.5 N–m (200 kgf–cm, 14 ft–lbf)
HINT: Install the manifold stay so that the tip of the
stay touches the head of the differential retainer in–
stalllation bolt as shown in the illustration.
(c) Install 2 new gaskets and the EGR pipe with the 4
nuts.
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)
(d) Install the main heated oxygen sensor (Bank 1 Sensor
1).
Torque: 44 N–m (450 kgf–cm, 33 ft–lbf)