Toyota 1 MZ–FE Manual page 127

1MZ–FE ENGINE – ENGINE MECHANICAL
15. DISCONNECT ENGINE WIRE FROM CABIN
(a) Remove the following parts:
(1) Under cover
(2) Lower instrument panel
(3) Glove compartment door
(4) Glove compartment
(b) Disconnect the following connectors:
(1) 3 ECM connectors
(2) 5 cowl wire connectors
(3) Cooling fan ECU connector
(c) Disconnect the wire clamp.
(d) Remove the 2 nuts, and pull out the engine wire from
the cowl panel.
16. REMOVE A/C COMPRESSOR WITHOUT
DISCONNECTING HOSES
(a) Disconnect the A/C compressor connector.
(b) Remove the drive belt.
(c) Remove the 5 bolts and drive belt adjusting bar brack–
et and, disconnect the A/C compressor.
HINT: Move the compressor aside and suspend it.
EG2–127