Toyota 1 MZ–FE Manual page 119

1MZ–FE ENGINE – ENGINE MECHANICAL
46. CONNECT RADIATOR HOSES
Connect the 2 hoses.
47. INSTALL RH ENGINE MOUNTING STAY
Install the mounting stay with the 3 bolts.
Torque: 31.4 N–m (320 kgf–cm, 23 ft–lbf)
48. CONNECT GROUND STRAPS
Connect the 2 straps.
49. w/ CRUISE CONTROL SYSTEM:
INSTALL CRUISE CONTROL ACTUATOR
(a) Connect the actuator and bracket with the 3 bolts.
(b) Connect the actuator connector and clamp.
(c) Install the actuator cover with the bolt and clip.
50. INSTALL AIR CLEANER CAP, VOLUME AIR
FLOW METER AND AIR CLEANER HOSE
(a) Connect the air cleaner hose, and install the air clean–
er cap and volume air flow meter with the 4 clips.
(b) Tighten the air cleaner hose clamp bolt.
(c) Connect the PCV hose.
(d) Connect the accelerator cable clamp.
(e) Connect the volume air flow meter connector and
wire clamp.
EG2–119