Toyota 1 MZ–FE Manual page 255

1MZ–FE ENGINE – SFI SYSTEM
(e) Connect the following hoses:
(1) Brake booster vacuum hose
(2) PCV hose
(3) Actuator vacuum hose
(f) Connect the DLC1.
(g) Connect the 2 ground straps with the nut.
Torque: 14.5 N–m (145 kgf–cm. 10 ft–lbf)
(h) Connect the following hoses:
(1) 2 water bypass hoses to throttle body
(2) Air assist hose to throttle body
(i) Connect the following vacuum hoses:
(1) Vacuum hose to air intake chamber
(2) 2 vacuum hoses to throttle body
(3) Vacuum hose to charcoal canister
(j) Connect the following connectors:
(1) A/C idle–up valve connector
(2) EGR gas temperature sensor connector
(3) Throttle position sensor connector
(4) IAC valve connector
EG2–255