Toyota 1 MZ–FE Manual page 341

1MZ–FE ENGINE – COOLING SYSTEM
HINT:
Do not stake the areas protruding around the
pipes, brackets or tank ribs.
The points shown in the illustration and oil cooler
near here cannot be staked with the SST. Use a
plier or similar object and be careful not to
damage the core plates.
(b) Check the lock plate height (H) after completing the
caulking.
Plate height:
7.75 – 8.25 mm (0.305 – 0.325 in.)
If not within the specified height, adjust the stopper
bolt of the handle again and perform the caulking
again.
6. PAINT LOCK PLATES
EG2–341