Toyota 1 MZ–FE Manual page 338

EG2–338
1MZ–FE ENGINE – COOLING SYSTEM
COMPONENTS FOR DISASSEMBLY AND
ASSEMBLY
RADIATOR DISASSEMBLY
(See Components for Disassembly and Assembly)
ASSEMBLY OF SST
09230 – 01010
(a) Install the claw to the overhaul handle, inserting it in
the hole in part "A" as shown in the diagram.
(b) While gripping the handle, adjust the stopper bolt so
that dimension "B" shown in the diagram is 0.2–0.5
mm (0.008–0.020 in.).
NOTICE: If this adjustment is not performed, the claw
may be damaged.