Viewing Virtual Interface Statistics - Motorola RFS Series Reference Manual

4-16 Motorola RF Switch System Reference Guide
2. Select the Configuration
The screen displays with the name of the VLAN in the upper left-hand side. The VLAN ID cannot be
modified and should be used to associate the VLAN ID with the description and IP address assignments
defined.
3. If necessary, modify the
operation within the switch managed network.
4. Unselect the
manually and you do not want DHCP to provide them.
5. Use the Primary IP Address
6. Enter the Subnet Mask
7. Select the Set as Management Interface
interface.
8. Use the Secondary IP Addresses
VLAN IDs. The addresses provided will be used if the primary IP address is unreachable.
Select the Add
from a sub screen. Select an existing secondary address and select
secondary address as needed.
9. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel

4.4.2 Viewing Virtual Interface Statistics

The Statistics
To view virtual interface statistics:
1. Select Network
tab and click the
Description of the VLAN, to make it representative of the VLAN's intended
Use DHCP to obtain IP Address automatically
field to manually enter the IP address for the virtual interface.
for the IP address.
field to define/modify additional IP addresses to associate with
button (within the Secondary IP Addresses field) to define/modify additional addresses
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
screen displays information about packet level statistics and errors at the interface.
> Switch Virtual Interface
Edit button.
checkbox to assign IP addresses
checkbox to convert the selected VLAN ID to a management
Edit
from the main tree menu.
or Delete to revise or remove a