Interface - Motorola RFS7000 Series Reference Manual

5.1.15 interface

Global Configuration Commands
Use this command to configure a selected interface. This command is used to enter the interface configuration
mode for the specified physical/ Switch Virtual Interface (SVI) interface. If the VLANx (SVI) interface does not
exist, it is automatically created.
NOTE The interface mode leads to the
see
The prompt changes from
Syntax
interface(IFNAME|fe|ge <1-4>|sa <1-4>|tunnel <1-32>|vlan <1-4094>)
Parameters
IFNAME
ge <1-4>
me1
sa <1- 4>
tunnel <1-32>
vlan <1-4092>
Usage Guidelines
Use
[no] interface <interface-name>
interfaces.
Example
RFS7000(config)#interface me1
RFS7000(config-if)#
RFS7000(config)#interface ge 3
RFS7000(config-if)#
RFS7000(config)#interface sa 2
RFS7000(config-if)#
RFS7000(config)#interface tunnel 27
RFS7000(config-if)#
RFS7000(config)#interface vlan 400
RFS7000(config-if)#
Interface Instance on page
RFS7000(config)#
Interface name.
GigabitEthernet interface. Select an index value between 1 - 4.
FastEthernet interface.
StaticAggregate interface. Select an index value between 1 - 4.
Tunnel interface. Select an index value between 1 - 32.
VLAN interface. Select an index value between 1 - 4092.
to delete the specified SVI. Valid interfaces include all VLANx
instance. For additional information,
config-if
12-1.
to
RFS7000(config-if)#
5-27