Hostname; System Status; Table 10: System Status Commands - Motorola EX-3524 Cli Reference Manual

Layer 2 gigabit ethernet poe/poe+ switch
Hide thumbs Also See for EX-3524:
Table of Contents

Advertisement

Chapter 4
| System Management Commands

System Status

hostname

System Status
This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The host name specified by this command is displayed by the
command and on the Show > System web page.
This command and the
prompt as shown in the example below. Using the no form of either command
will restore the default command line prompt.
Example
Console(config)#hostname RD#1
RD#1(config)#
This section describes commands used to display system information.

Table 10: System Status Commands

Command
show access-list
tcam-utilization
show memory
show process cpu
show running-config
show startup-config
show system
prompt
command can be used to set the command line
Function
Shows utilization parameters for TCAM
Shows memory utilization parameters
Shows CPU utilization parameters
Displays the configuration data currently in use
Displays the contents of the configuration file (stored in
flash memory) that is used to start up the system
Displays system information
– 82 –
show system
Mode
PE
NE, PE
NE, PE
PE
PE
NE, PE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-3548

Table of Contents