Connecting The Paired Device; Unpairing; Visibility Setting - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
5 - 92
8.1.2.4

Connecting the Paired Device

Enable the Bluetooth device. Select [2. Enable] in the
connection screen.
Figure 5-116 Connecting the Paired Device
8.1.2.5

Unpairing

To unpair a paired the Bluetooth device, select the device
in the [Delete] screen.
Figure 5-117 Unpairing a Device
8.1.2.6

Visibility Setting

Set whether to make information about the BHA-L UNIT
visible to other Bluetooth devices (default: [1. Disable]).
Figure 5-118 Setting Visibility Option
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
After pairing a Bluetooth device, be sure to
configure its connection to enable it. If
settings are not completed, the Bluetooth
device that does the pairing cannot be used.
UNIVERGE SV8100