Wm-L Unit Attached To Wall Plate - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
5.2.9

WM-L UNIT Attached to Wall Plate

The WM-L UNIT (Wall Mount Unit) is used to attach any DT300/
DT700 Series multiline terminal to the wall plate This unit connects
to the back side of the telephone.
When optional adapters are used, the multiline terminal must be
installed on the wall plate using the WM-L UNIT.
1. Plug line cord in the wall plate receptacle. Leave about eight
inches of cord and bundle the rest.
2. Feed the line cord through the opening in the WM-L UNIT.
3. Plug the line cord into the Multiline Terminal as illustrated in
Figure 5-82 Plugging in Line
4. Align the four cutouts with the four tabs on the WM-L UNIT
(refer to
Line In
Figure 5-82 Plugging in Line Cord
Figure 5-83 Cutouts for WM-L UNIT on page
Cord.
Issue 5.0
5-70).
5 - 69