Cards; Removing A M.2 Card; Figure 28: Removing A M.2 Card - Kontron ZINC CUBE C232 User Manual

4.15. M.2 Cards

4.15.1. Removing a M.2 Card

To remove a M.2 card:
1. Power off the server, and then detach the power cord from the power supply.
2. Remove the top cover.
3. Remove the system board tray.
4. Remove the screw and washer securing the M.2 card and M.2 holder.
5. The M.2 card pops up. Grasp it by the edges and slide it out.

Figure 28: Removing a M.2 Card

www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 43