Security Menu - Fujitsu PRIMERGY TX200 S2 User Manual

Item
LAN Setting
Local IP address
Subnet mask
Gateway address

8.2.11 Security Menu

The [Security] menu sets the security options.
Main Advanced
Setup Password
System Password
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
Help
F1
Esc Exit
Item
Setup Password
System Password
Set Setup Password
Setup Password Lock
table: Items on the IPMI Submenu
Setting
Configure the network. Press the [Enter] key to display the [LAN Setting]
submenu. Set the following items.
-
-
-
PhoenixBIOS Setup Utility
Security Server
Not installed
Not installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Items on the Security Menu
Setting
Displays whether a user password (setup password) is set or not.
• Not Installed: A password has not been set.
• Installed: A password has been set.
Displays whether an administrator password (system password) is set or not.
• Not Installed: A password has not been set.
• Installed: A password has been set.
Sets a setup password.
Setting a setup password makes it necessary to enter the password in order to start
the BIOS Setup Utility.
Press the [Enter] key to display the password input window. Enter the setup
password. For more details, refer to "9.4.2 Security against Unauthorized Use"
( pg.285).
• Standard (at the time of
purchase)
• Extended
PRIMERGY TX200 S2 User's Guide
Description
Set the IP address of the onboard LAN.
Note:
Set an IP address different from that in OS
settings.
Set the subnet mask.
Set the default gateway.
Exit
Item Specific Help
Setup Defaults
F9
Save and Exit
F10
Description
Sets the scope protected by the setup password.
This setting is possible when a setup password is
specified.
8
245